Saluspa eo2 error

Does your SaluSpa hot tub display an ‘EO2’ error message? This problem can often cause confusion and frustration. Don’t let this error hinder your relaxing spa experience. In this article, we’ll cover why the EO2 error occurs and how to fix it efficiently. So, grab a cup of coffee and keep reading!

Understanding the SaluSpa EO2 Error: The Root Cause

Your SaluSpa hot tub features a built-in water treatment system, essential for maintaining water cleanliness. This system monitors the performance and functionality of the hot tub. When the EO2 error flashes, it typically signals an issue with the water flow sensor or the pump’s intake and exhaust.

saluspa eo2 error

Reasons behind SaluSpa EO2 Error

The SaluSpa EO2 error typically arises due to several issues related to the pump and water flow system of the hot tub. The most common reasons include:

  • Blocked or Obstructed Water Flow:  This could be due to accumulated debris, dirt, or foreign objects that impede water flow through the pump or filters.
  • Insufficient Water Level: If the water in your SaluSpa is below the required level, it could result in the EO2 error. The pump needs an adequate water level to function correctly.
  • Malfunctioning Water Flow Sensor: The sensor, responsible for monitoring the water flow through the system, can malfunction due to age, wear and tear, or accumulated debris.
  • Pump Intake and Exhaust Issues: If the pump’s intake or exhaust is blocked or malfunctioning, it could lead to the EO2 error.
  • Faulty Filters: Over time, filters can become clogged with dirt and debris. If not cleaned or replaced regularly, they can cause a blockage, leading to the EO2 error.
  • Technical Glitches: Occasionally, the system might experience a technical glitch causing the EO2 error, despite no apparent issues with the water flow or pump.

Each of these reasons is directly related to the maintenance and proper functioning of the SaluSpa’s water flow system and pump. It is important to regularly check and service these components to prevent the occurrence of the EO2 error.

How to Fix SaluSpa EO2 Error?

Fix 1: Detailed Steps to Address SaluSpa EO2 Error

Here’s a comprehensive guide to fix the EO2 error on your SaluSpa hot tub.

  • Step 1: Turn Off and Unplug the SaluSpa: Before you start any kind of maintenance or repair, ensure that your SaluSpa is completely off and unplugged. This step is crucial for both your safety and the protection of the hot tub’s components.
  • Step 2: Inspect the Filters: Dirty or clogged filters are often the main cause of the EO2 error. Take out the filters from their housing. Look for any visible debris or dirt and clean it thoroughly. If the filters are too old or heavily clogged, consider replacing them with new ones.
  • Step 3: Check the Water Level: If the water level in your SaluSpa is too low, it could trigger the EO2 error. Check the water level and if it’s not sufficient, fill up your SaluSpa to the recommended level as per the user manual.
  • Step 4: Examine Water Flow: The water intake and output areas must be free from any blockages. Check these areas and clear any obstructions if found. This step will ensure the water flows smoothly, without causing any strain on the pump.
  • Step 5: Inspect the Pump: Remove the pump carefully and check it for any visible damage or blockages. Make sure that the pump’s intake and exhaust are clear. If you find any damage, you may need to replace the pump.
  • Step 6: Check the Water Flow Sensor: This sensor plays a key role in detecting any issues with water flow. Check for any signs of damage or dirt accumulation. If it seems to be malfunctioning, consider getting it replaced.
  • Step 7: Reset the System: After you’ve done all the checks and made any necessary changes, it’s time to reset the system. Plug in your SaluSpa and turn it on. The EO2 error should now be resolved.

Remember, if the error still persists after following these steps, it’s advisable to seek professional assistance to avoid damaging your SaluSpa.

Fix 2: Advanced Troubleshooting Steps for SaluSpa EO2 Error

If basic troubleshooting does not resolve the EO2 error, here are some advanced steps you can follow:

Step 1: Total System Reset

Sometimes, your SaluSpa might need a total system reset to clear out any technical glitches. To do this, unplug your hot tub and let it sit idle for about 15-20 minutes. After this period, plug it back in and see if the EO2 error has been cleared.

Step 2: Deep Clean the Filters

If you haven’t replaced the filters for a long time, they might require a deep cleaning. Remove the filters, soak them in a cleaning solution specifically designed for hot tub filters, and rinse thoroughly. Allow them to dry completely before reinstalling.

Step 3: Clearing Blockages from Pump and Hoses

The pump or hoses might have internal blockages not visible from outside. In such cases, use a plumbing snake or a similar tool to clear any obstructions. Remember to be gentle to avoid causing damage.

Step 4: Replacing the Water Flow Sensor

If you suspect that the water flow sensor is not working correctly, consider replacing it. Refer to your SaluSpa manual or consult a professional for this task as it involves delicate parts of the hot tub.

Step 5: Professional Inspection and Repair

If the EO2 error persists even after trying all the above steps, it’s best to call in a professional. A hot tub technician will have the necessary tools and expertise to diagnose and repair any underlying issues causing the EO2 error.

This advanced troubleshooting should help resolve the EO2 error on your SaluSpa. However, remember that regular maintenance is key to preventing such errors from occurring in the first place.

Read more: Sling TV error 14-0

Fix 3: Comprehensive Measures to Tackle SaluSpa EO2 Error

If you’re still grappling with the EO2 error, don’t worry. Here are additional steps that can help you resolve it:

Step 1: Conduct a Full System Flush

Sometimes, a build-up of impurities, debris or biofilm in your SaluSpa’s plumbing can cause issues like the EO2 error. Performing a full system flush can help. There are specific hot tub flushing products available in the market. Follow the instructions provided on the product and make sure to drain and thoroughly clean your hot tub afterward.

Step 2: Replace Old Filters

Old filters can often be the cause of the EO2 error. If your filters have not been replaced for a considerable period, they may not be effectively filtering the water. Consider investing in new filters and installing them according to your SaluSpa manual.

Step 3: Inspect and Clean Water Jets

Water jets can sometimes become blocked with dirt or debris, causing the EO2 error. Inspect the jets and use a soft brush or a jet cleaning tool to gently clean them. Make sure not to damage the jets during cleaning.

Step 4: Check Electrical Connections

Faulty electrical connections can trigger the EO2 error. Check all the connections to the SaluSpa for any signs of wear, damage, or looseness. If you’re not comfortable with this, it’s best to call in a professional.

Step 5: Hire a Professional for Thorough Inspection

If you’ve tried all of the above and are still seeing the EO2 error, it may be time to get a professional involved. A certified hot tub technician can conduct a thorough inspection and repair of your SaluSpa to rectify the problem.

While these comprehensive measures require more effort, they’re likely to address any persistent EO2 errors. Remember, proper care and maintenance of your SaluSpa will prevent such issues from arising, providing you with a seamless and enjoyable hot tub experience.

Fix 4: Additional Solutions to Eliminate SaluSpa EO2 Error

If you’re still facing the EO2 error after trying the aforementioned fixes, here are additional solutions that could help:

Step 1: Check the Temperature

In extremely cold conditions, the water in your SaluSpa can freeze, disrupting the water flow and potentially causing the EO2 error. Make sure your hot tub is in a place where the water temperature doesn’t fall below freezing.

Step 2: Test the Water Quality

Imbalances in water chemistry can sometimes cause errors. Using a water testing kit, verify that the pH, alkalinity, and sanitizer levels of your hot tub water are within the recommended range. Adjust as necessary following the instructions provided in your SaluSpa manual or on the water treatment products.

Step 3: Clean the Heating Element

A dirty heating element can affect water flow and cause the EO2 error. To clean it, turn off and unplug the SaluSpa, then remove the heater and carefully clean any scale or build-up.

Step 4: Inspect the Control Panel

Sometimes, the issue might be with the control panel displaying the error rather than the water flow. Inspect the control panel for any signs of damage or malfunction. If you spot any issues, you might need professional assistance for repair or replacement.

Step 5: Seek Manufacturer Support

If all else fails and the EO2 error still persists, reach out to the SaluSpa customer service for assistance. They might have specific troubleshooting steps for your model or offer service or replacement if your hot tub is under warranty.

This detailed approach should help you eradicate the persisting EO2 error. However, it’s crucial to remember that regular care and maintenance of your SaluSpa can prevent many issues from arising, ensuring you enjoy a relaxing and hassle-free spa experience.

Fix 5: Expert Advice for Handling SaluSpa EO2 Error

If you’ve tried the fixes above without success, here are a few more expert tips to manage the EO2 error in your SaluSpa:

Step 1: Reset the Thermal Cut-Out

Sometimes, a triggered thermal cut-out can cause the EO2 error. To reset it, turn off and unplug the SaluSpa. Wait for about 30 minutes to let the system cool down, then plug it back in and turn it on.

Step 2: Check the Circulation Pump

If your SaluSpa has a separate circulation pump, it could be the source of the problem. Check if the pump is running properly. If not, it may need repair or replacement.

Step 3: Clear the Air Bleed Valve

A blocked air bleed valve can affect water flow and cause the EO2 error. Locate the valve (usually near the heater or pump), open it carefully to release any trapped air, and then close it again.

Step 4: Replace the Control Board

A faulty control board can lead to a variety of issues, including the EO2 error. If the board is damaged or malfunctioning, it might need to be replaced. Since this is a complex task, it’s best to let a professional handle it.

Step 5: Consult a Certified Technician

If all your efforts have been in vain and the EO2 error still persists, contact a certified hot tub technician. They have the training and tools to accurately diagnose and resolve complex issues.

By following these expert tips, you should be able to rectify the EO2 error in your SaluSpa. Remember, regular maintenance of your hot tub is the best way to prevent such issues and ensure a relaxing spa experience.

Fix 6: Last Resort Solutions for SaluSpa EO2 Error

If you’re still struggling with the EO2 error, here are the final solutions that may help:

  • Step 1: Run a Complete Drain and Refill Cycle: Over time, water quality can degrade and cause various issues, including the EO2 error. One solution could be completely draining your SaluSpa, cleaning it thoroughly, and refilling with fresh water. This process resets the water quality, potentially resolving the error.
  • Step 2: Use a Filter Cleaning Solution: Sometimes, merely rinsing the filters might not be enough. Using a dedicated filter cleaning solution can help remove any stubborn debris or oils that may be causing blockages and triggering the EO2 error.
  • Step 3: Examine and Clean the Impeller: The impeller, an important part of the pump, can get blocked or damaged. Carefully check the impeller for any blockages or signs of wear. Clean it gently and replace it if necessary.
  • Step 4: Check for any Leaks: Leaks in your SaluSpa could cause low water pressure and thus the EO2 error. Carefully inspect your SaluSpa for any signs of leaks and have them repaired immediately.
  • Step 5: Engage SaluSpa Support or Certified Technicians: If the EO2 error is still persisting, it’s time to get in touch with the SaluSpa support team or a certified hot tub technician. They can provide specific troubleshooting steps or professional repairs for your model.

While these last resort solutions might require more time and effort, they could be the key to resolving the persistent EO2 error. Remember, a well-maintained SaluSpa ensures a hassle-free and enjoyable hot tub experience.

Fix 7: Revisiting Basic Checks for SaluSpa EO2 Error

If the EO2 error still persists, it might be time to revisit some of the basic checks to ensure nothing was missed.

  • Step 1: Thoroughly Check the Filters: Re-examine the filters for any unseen blockages or damages. It’s a common cause of the EO2 error and sometimes can be easily overlooked. If necessary, replace the filters to ensure efficient water flow.
  • Step 2: Examine All Hoses: Inspect all hoses connected to your SaluSpa for any kinks, blockages, or signs of wear and tear. Such issues can lead to impaired water flow, causing the EO2 error.
  • Step 3: Double Check the Water Level: Even a slightly low water level can lead to the EO2 error. Make sure your SaluSpa’s water is at the recommended level according to the user manual.
  • Step 4: Clean the Entire Water Flow System: Ensure the entire water flow system, including the jets, filters, pump, and heater, is thoroughly cleaned and free of any debris or blockages.
  • Step 5: Contact SaluSpa Customer Support: Finally, if none of the fixes work, it’s best to reach out to SaluSpa’s customer support. Their team is well-equipped to provide specific troubleshooting steps or arrange for a professional technician to service your hot tub.

Revisiting the basics can sometimes help identify any overlooked issues causing the EO2 error. Remember, regular maintenance and checks of your SaluSpa are crucial in preventing such problems and ensuring an enjoyable hot tub experience.

Fix 8: Overlooked Aspects of Troubleshooting SaluSpa EO2 Error

Sometimes, the key to resolving a persistent issue like the EO2 error lies in considering the factors we often overlook:

  • Step 1: Monitor SaluSpa Usage: Excessive usage of the SaluSpa can sometimes lead to strain on its components, triggering the EO2 error. Monitor usage and ensure that the hot tub is not being overused or overloaded.
  • Step 2: Inspect for External Damages: A careful inspection of your SaluSpa might reveal external damages, such as cracks, which can cause water leaks and affect water flow, leading to the EO2 error. Repair any external damages promptly.
  • Step 3: Evaluate the Quality of Spa Chemicals: The quality of the chemicals you use in your SaluSpa can affect the overall functionality. Ensure that you’re using high-quality spa chemicals to maintain the water.
  • Step 4: Check the Power Supply: Inconsistent or fluctuating power supply can cause errors. Check if your SaluSpa’s power supply is stable and meets the required specifications.
  • Step 5: Contact a Certified Hot Tub Technician: If the EO2 error still persists, it’s best to contact a certified hot tub technician. They can offer a professional evaluation and rectify any underlying issues causing the error.

Considering these often overlooked aspects can provide a fresh perspective and help you successfully tackle the EO2 error. It’s important to remember that maintaining your SaluSpa well is the best way to prevent such issues from cropping up in the first place.

Preventing SaluSpa EO2 Error: Essential Tips and Best Practices

Prevention is often better than cure. Following are some important tips and best practices to prevent the occurrence of the EO2 error in your SaluSpa:

  • Tip 1: Regularly Clean and Replace Filters: Filters play a crucial role in maintaining water flow. Cleaning them regularly and replacing them when needed will help prevent issues that lead to the EO2 error.
  • Tip 2: Maintain Optimal Water Levels: Always ensure your SaluSpa’s water is at the recommended level. Too low a level can strain the pump and trigger the EO2 error.
  • Tip 3: Check Water Quality: Regularly test your spa water for correct chemical levels. Imbalances can cause issues, including the EO2 error. Use a spa water test kit and adjust the chemical levels as needed.
  • Tip 4: Regular Spa Maintenance: Perform regular maintenance of your SaluSpa, including cleaning, draining and refilling, and inspecting all components. A well-maintained spa is less likely to experience errors.
  • Tip 5: Avoid Overloading Your Spa: Overloading your spa with too many users can put undue stress on the system, leading to errors like EO2. Always follow the recommended user limit for your SaluSpa.

By following these preventive measures, you can greatly reduce the chances of encountering the EO2 error, ensuring a smooth and enjoyable hot tub experience.


To wrap things up, solving the SaluSpa EO2 error involves identifying the cause and applying the correct fix. From checking water flow components, maintaining water quality, to contacting professionals, there’s a fix for every scenario. Remember, preventive steps like regular maintenance and proper usage can go a long way in avoiding such errors. If all else fails, never hesitate to reach out to SaluSpa support or certified technicians for expert help. Happy hot tubbing!


What does the SaluSpa EO2 error signify?

The EO2 error in a SaluSpa indicates a problem with the water flow in your hot tub.

What are the common causes of the EO2 error?

Common causes include blockages in filters or jets, low water level, and poor water quality.

How can I fix the EO2 error?

Start by checking water flow components, maintaining water quality, and ensuring optimal usage. If needed, call in professionals.

Is the EO2 error harmful to my SaluSpa?

If ignored, the EO2 error can lead to more significant issues. It’s best to address it as soon as it appears.

How can I prevent the EO2 error?

Regular maintenance, proper usage, and keeping water quality at optimal levels can prevent the occurrence of the EO2 error.

What if the EO2 error persists despite troubleshooting?

If the EO2 error continues despite all efforts, it’s recommended to contact SaluSpa support or a certified hot tub technician.

Leave a Comment